Image for Crownarc Outer Roller for 1
Trivantage Plus Discount
+ / - Hover over image to Zoom
Other Views

Bendarc Crownarc Gear Mounted Roller 1" Radius
for 1" Square Tubing

Item # 205329

Trivantage Plus members receive an extra 5% off this product!  

Gain access to pricing, inventory, and online ordering by becoming a customer today.
Click here to apply!

Description

Bends 7/8 inch, 1 inch or 1-1/4 inch outside diameter marine tubing using the same dies. The crown radius is adjustable from 30 inch minimum to infinity. The only Crowner with gear drive; Crownarc's crank turns both lower wheels and "takes a bigger bite" to get more crown per pass. The Z wheel drive system makes control much easier. The back plate is boiler plate steel and rollers are high-density polymer for mar resistant contact with fine marine tubing. The center roller is fully adjustable.

The Crownarc is supplied with rollers cut for 1 inch diameter marine tubing. This easily crowns 1 inch and 7/8 inch stainless or aluminum marine tubing. Bender can be mounted on the wall, on a table or on the side or rear of a truck.

Product Note: This item is available by dropship only.

Info & Guides

No downloads are currently available for this product.

Specifications

Product Category:
Crownarc Crown Bender
For:
1 in. square tubing