Image for Eye End Slip-Fit #290 1
+ / - Hover over image to Zoom
Other Views
Thumbnail Image for Eye End Slip-Fit #290 1 Thumbnail Image for Eye End Slip-Fit #290 1 Thumbnail Image for Eye End Slip-Fit #290 1 Thumbnail Image for Eye End Slip-Fit #290 1

Slip-Fit Eye End #290 with Screw
Malleable Iron / Stainless Steel for 3/4" Pipe

Item # 124190

Gain access to pricing, inventory, and online ordering by becoming a customer today.
Click here to apply!

Description

These #290 Slip-Fit Eye Ends are made from malleable iron and work with 1" OD tubing or 3/4" pipes. The eye ends are properly proportioned for greatest rigidity and furnished with a stainless-steel square head set screw. The small eye allows a snug fit between the eye end, rod, and rafter holder. A barrel depth of 2 inches assures stronger holding power between the eye end and pipe. Use to join front bars and end rafters.

A preferred choice in awning hardware, Slip-Fit fittings cut down on stress and time during awning installation. No threading is needed as all fittings easily slip on or over the frame and are secured by square-head set screws. The fittings also allow quick adjustment when the tube/pipe is not cut to precise length. Slip-Fit eye ends are durable and easy to use.

Info & Guides

No downloads are currently available for this product.

Specifications

Product Category:
Slip-Fit Eye End
Style#:
290
For:
1 in. OD tubing, 3/4 in. ID pipe
Material:
Malleable Iron with Stainless-Steel Screw
Maximum Bolt Standard:
7/16 in.
Number Of Set Screws:
1