Image for Carbiepole 2
+ / - Hover over image to Zoom
Other Views
Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2 Thumbnail Image for Carbiepole 2

Carbiepoles® Oval Mounting Base
for 2" Poles 12" x 8" x 8" Stainless Steel

Item # 205438

Gain access to pricing, inventory, and online ordering by becoming a customer today.
Click here to apply!

Description

The Carbiepoles oval mounting base can be used on boats but is mainly used for awnings and shade sails in home, deck, and patio use. It's made from stainless steel and works with 2" poles (#205435). Hardware is not included (requires a 1/4"-20 machine screw, #14 tapping screw, or #8 metric screw; panhead is best). The oval mounting base is 12" in length, 8" in width, and 8" in height.

Product Notes:

  • When installing, be careful not to overtighten the clamp.
  • Using the pad eye on the top of the pole, you can install a strap and attach it to a cleat on the boat. This creates equal tension on both sides of the pole, so the pole does not flex while the boat is running.
  • If attaching pad eyes, they must be riveted on (using screws by themselves may weaken the integrity of the pole and may not be strong enough for a permanent solution).
  • To clean, simply rinse thoroughly with water and dry.
  • 1.5” Carbiepoles are recommended for projects sized <50 square feet. For larger projects or heavier fabrics, consider 2” Carbiepoles.


Poles should be taken down during inclement weather to avoid damage.

Trademark: Carbiepoles® is a registered trademark of AMC Pole Corporation.

Specifications

Product Category:
Carbiepoles Mounting Base
Size:
12" (L) x 8" (W) x 8" (H)