The non-PFAS solution-dyed acrylic SunPatch fabric patch is a smart choice for repairing marine fabrics, awnings, umbrellas, and more. Designed to match select Sunbrella colors, like Captain Navy seen here, these adhesive patches are easy to use. The pressure-sensitive adhesive sticks firmly, while the heat-activated bond ensures long-lasting durability.
Patches can be applied using a hand iron, heat press, or hot air gun with roller. Their two-part adhesion system allows for easy repositioning prior to applying heat. Browse SunPatch colors made to withstand the elements and deliver dependable reinforcement. Don’t replace it - SunPatch it!
Best Practices & Recommendations:- Trim to size with rounded corners which prevents catching and lifting over time.
- Be sure your application surface is clean and dry before applying SunPatch.
- Avoid heat setting temperatures above 220 degrees Fahrenheit to prevent shrinkage and adhesive seepage.
- For best results, apply heat for 1 minute and let cool for several hours before use in the field. For two-sided patching projects, apply heat for 30 seconds per side.
- All patches are run in the warp direction (length of the roll). Be sure to match the direction of the SunPatch and original fabric for a less-noticeable application.
Product Note: SunPatch™ by Fabric Ingenuity is designed to maintain its original physical properties when stored properly for up to 24 months. It is important to keep SunPatch™ stored in ambient temperatures not to exceed 80° F in its original packaging.
